OVHcloud Network Status

Current status
Legend
  • Operational
  • Degraded performance
  • Partial Outage
  • Major Outage
  • Under maintenance
mise à jour ACE astuce
Scheduled Maintenance Report for Network & Infrastructure
Completed
b. After the image is copied to the supervisor engine, access configuration mode and set the boot
variable for the ACE and the image. For example, to access configuration mode and set the boot
variable if the ACE is in slot 3, enter:
Router# config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#boot device module 3 disk0:c6ace-t1k9-mz.A2_1.bin
Device BOOT variable = disk0:c6ace-t1k9-mz.A2_1.bin
Warning: Device list is not verified
Router#
From the ACE, perform the following steps:
a. Boot the ACE from the image on the supervisor engine by using the boot eobc command.
rommon 1> boot eobc:
Posted Mar 03, 2011 - 20:43 UTC