RSS for all categories
FS#28651 — vss-8b-6k
Attached to Project— Network and racks
| Maintenance | |
| Roubaix → RBX-4 | |
| CLOSED | |
 |
Summary: We will replace the defective module.
Impact: No impact.
Start Time: 2017-12-01 02:00 (UTC)
End Time: 2017-12-01 02:45 (UTC)
Duration: 45min
http://status.ovh.com/?do=details&id=15199
Date: Tuesday, 19 December 2017, 02:00AMImpact: No impact.
Start Time: 2017-12-01 02:00 (UTC)
End Time: 2017-12-01 02:45 (UTC)
Duration: 45min
http://status.ovh.com/?do=details&id=15199
Reason for closing: Done
The maintenance has been rescheduled:
Summary: We will replace the defective module.
Impact: No impact.
Start Time: 2017-12-05 02:00 (UTC)
End Time: 2017-12-05 02:45 (UTC)
Duration: 45min
we started the maintenance.
The module not detected by vss-8b-6k:
Dec 5 03:10:41.842: %ONLINE-SP-6-REGN_TIMER: Module 9, Proc. 0. Failed to bring online because of registration timer event
Dec 5 03:10:41.842: %C6KPWR-SP-4-DISABLED: power to module in slot 9 set off (Module Failed SCP dnld)
Will check this issue with Cisco techs.
The module has the hardware issue and we will replace it with the spare one.
We start the maintenance
the card doesn't bring up. We will check with Cisco to have more information. there was no impact during the maintenance
We found a card with a DFC3 module on it and are ready to put it back in production. We plan to do it on 19th December at 01h00 (Paris time).
We starting the maintenance.
The card has been replaced sucessfully. We can see some lag spike during the power on of the card but nothing else.