OVHcloud Network Status

Current status
Legend
  • Operational
  • Degraded performance
  • Partial Outage
  • Major Outage
  • Under maintenance
syd1-sdagg1a-n9 & syd1-sdagg1b-n9
Scheduled Maintenance Report for Network & Infrastructure
Completed
The nexus pair syd1-sdagg1a-n9 and syd1-sdagg1b-n9 from 7.0(3)I2(1a) to 7.0.3.I5.1

ISSU ( In Service Software Upgrade ) is not available on the 7.0.3.I2 code base.

We will fully isolate the trafic on a box prior to the update. No impact is expected during the maintenance

The update will be achieve on Tuesday February 14th, around 22h AEST ( 12h CET )






Update(s):

Date: 2017-02-14 13:19:56 UTC
all done

Trafic is back to normal on both AGG

Date: 2017-02-14 13:09:37 UTC
1b is up to date, SMU install in progress
The trafic is still handled by 1a

Date: 2017-02-14 12:56:01 UTC
All okay on 1A , we start the install on syd1-sdagg1b-n9

904524288 bytes total
syd1-sdagg1b-n9# install all nxos nxos.7.0.3.I5.1.bin
Installer will perform compatibility check first. Please wait.
Installer is forced disruptive

Verifying image bootflash:/nxos.7.0.3.I5.1.bin for boot variable \"nxos\".
[####################] 100% -- SUCCESS

Verifying image type.
[####################] 100% -- SUCCESS

Preparing \"nxos\" version info using image bootflash:/nxos.7.0.3.I5.1.bin.
[####################] 100% -- SUCCESS

Preparing \"bios\" version info using image bootflash:/nxos.7.0.3.I5.1.bin.
[# ] 0%


Date: 2017-02-14 12:50:07 UTC
router UP

904524288 bytes total
syd1-sdagg1a-n9# install commit
[####################] 100%
Install operation 3 completed successfully at Tue Feb 14 13:49:08 2017

syd1-sdagg1a-n9#
syd1-sdagg1a-n9#
syd1-sdagg1a-n9#
syd1-sdagg1a-n9#
syd1-sdagg1a-n9# sh install committed
Boot Image:
NXOS Image: bootflash:/nxos.7.0.3.I5.1.bin

Committed Packages:
nxos.CSCvb96755-n9k_ALL-1.0.0-7.0.3.I5.1.lib32_n9000
syd1-sdagg1a-n9#
syd1-sdagg1a-n9#
syd1-sdagg1a-n9#

VPC UP

We put back the trafic

Date: 2017-02-14 12:43:02 UTC
yd1-sdagg1a-n9# install add nxos.CSCvb96755-n9k_ALL-1.0.0-7.0.3.I5.1.lib32_n9000.rpm activate
Adding the patch (/nxos.CSCvb96755-n9k_ALL-1.0.0-7.0.3.I5.1.lib32_n9000.rpm)
[####################] 100%
Install operation 1 completed successfully at Tue Feb 14 13:42:53 2017

Activating the patch (/nxos.CSCvb96755-n9k_ALL-1.0.0-7.0.3.I5.1.lib32_n9000.rpm)

======================================================
WARNING!!
This is a reload patch and system will be reloaded
if you proceed with patch operation.
=======================================================
Do you want to continue (y/n)?: [n]


Date: 2017-02-14 12:42:13 UTC
We are installing the SMU on 1A prior to upgrade 1B, it will cost an extra reload of the 1A router

Date: 2017-02-14 12:39:58 UTC
syd1-sdagg1a-n9 is up and running, We are putting back trafic on it
We also start to isolate syd1-sdagg1B-n9

Date: 2017-02-14 12:29:00 UTC
syd1-sdagg1a-n9 is reloaded, waiting to have the VPC up

1-sdagg1a-n9# sh vpc
Legend:
(*) - local vPC is down, forwarding via vPC peer-link

vPC domain id : 250
Peer status : peer link is down
vPC keep-alive status : Suspended (Destination IP not reachable)
Configuration consistency status : failed
Per-vlan consistency status : success
Configuration inconsistency reason: Consistency Check Not Performed
Type-2 inconsistency reason : Consistency Check Not Performed
vPC role : none established
Number of vPCs configured : 22
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Disabled (due to peer configuration)
Auto-recovery status : Disabled
Delay-restore status : Timer is off.(timeout = 30s)
Delay-restore SVI status : Timer is off.(timeout = 10s)
Operational Layer3 Peer-router : Disabled


Date: 2017-02-14 12:18:20 UTC

Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset Incompatible image



Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-Version Upg-Required
------ ---------- ---------------------------------------- -------------------- ------------
1 nxos 7.0(3)I2(1a) 7.0(3)I5(1) yes
1 bios v07.34(08/11/2015):v07.34(08/11/2015) v07.59(08/26/2016) yes


Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n] y


Install is in progress, please wait.

Performing runtime checks.



Incompatible image means that you can't go ISSU ( so it falls back to the classic update method with a reload power-cycle )



Date: 2017-02-14 12:14:34 UTC
syd1-sdagg1a-n9 is isolated, we start the install

syd1-sdagg1a-n9# install all nxos nxos.7.0.3.I5.1.bin
Installer will perform compatibility check first. Please wait.
Installer is forced disruptive

Verifying image bootflash:/nxos.7.0.3.I5.1.bin for boot variable \"nxos\".
[####################] 100% -- SUCCESS

Verifying image type.
[# ] 0%


Date: 2017-02-14 11:52:04 UTC
We are starting the isolation of syd1-sdagg1a-n9 prior to the Upgrade
Posted Feb 10, 2017 - 17:51 UTC