OVHcloud Network Status
Current status
Legend
- Operational
- Degraded performance
- Partial Outage
- Major Outage
- Under maintenance
sbg2-16a/b-n56
Scheduled Maintenance
Report for Network & Infrastructure
Completed
Nous allons mettre a jour ce couple de nexus vers la 7.1.3.n1.4 afin de corriger des bugs ( principalement sur fex 2348 )
Nous upgraderons en ISSU, qui est une maj hitless.
Cependant, l'upgrade charge aussi un nouveau firmware broadcom dans les fex, et il sera necessaire de reloader les fex 2348 ( et uniquement ceux la) afin que la maj soit effective.
La mise a jour débutera vers 22h
Update(s):
Date: 2016-06-24 00:44:36 UTC
all done, tout est okay sur ce couple
Date: 2016-06-24 00:14:41 UTC
le 16b est a jour, nous reloadons les fex 2348
sbg2-16b-n56# sh fex | i 2348
110 fex110 Online N2K-C2348TQ-10GE FOC1912R0GP
112 fex112 Online N2K-C2348TQ-10GE FOC1919R04T
113 fex113 Online N2K-C2348TQ-10GE FOC1930R42T
114 fex114 Online N2K-C2348TQ-10GE FOC1912R0GL
115 fex115 Online N2K-C2348TQ-10GE FOC1930R0BM
116 fex116 Online N2K-C2348TQ-10GE FOC1930R40E
117 fex117 Online N2K-C2348TQ-10GE FOC1930R113
sbg2-16b-n56# reload fex 110
WARNING: This command will reboot FEX 110
Do you want to continue? (y/n) [n] y
sbg2-16b-n56# reload fex 112
WARNING: This command will reboot FEX 112
Do you want to continue? (y/n) [n] y
sbg2-16b-n56# reload fex 113
WARNING: This command will reboot FEX 113
Do you want to continue? (y/n) [n] y
sbg2-16b-n56# reload fex 114
WARNING: This command will reboot FEX 114
Do you want to continue? (y/n) [n] y
sbg2-16b-n56#
sbg2-16b-n56#
sbg2-16b-n56#
Date: 2016-06-24 00:01:45 UTC
sbg2-16a-n56 est a jour, nous passons au 16b
Date: 2016-06-23 23:38:51 UTC
SUCCESS
Module 108: Non-disruptive upgrading.
SUCCESS
Module 109: Non-disruptive upgrading.
SUCCESS
Module 110: Non-disruptive upgrading.
Date: 2016-06-23 23:17:40 UTC
ca passe !
sbg2-16a-n56#
sbg2-16a-n56# sh install all status
There is an on-going installation...
Enter Ctrl-C to go back to the prompt.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Performing supervisor state verification.
SUCCESS
Supervisor non-disruptive upgrade successful.
Pre-loading modules.
le sw va upgrader les 20fexs
Date: 2016-06-23 23:02:49 UTC
a la louche, ca semble mieux apres le reprog
Linux(debug)# bios_cmd program nc72-fsp-v215.bin
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77c14000; SPIBAR = 0x0x77c14800
spibar address = 0x77c14800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
Memory ID: 0x17
Found flash device Micron N25Q064A, 8MB, Minimum sector size 4KB
Table: MFG Id: 0x20; DEV Id: 0x20
Table: MFG Id: 0x20; DEV Id: 0x71
Table: MFG Id: 0x20; DEV Id: 0xba
Platform Type: Norcal-384
ibexpeak_set_bp_bits: setting BP2, BP1, BP0 in the status register to 0x0
filename is nc72-fsp-v215.bin
Executing ibexpeak_bios_flash_program....
ibexpeak_n6k_nc128_bios_checksum...
Source file integrity verified.
SPIBAR base = 0x77414000; SPIBAR = 0x77414800
ibexpeak_program_bios_command_ex/899 Trying to Disabled Write Protection on the flash
00:1f.0:dc 01
{SNIP}
WSector 126 programmed successfully
WSector 127 programmed successfully
Flash programming successfully completed.
Checking SPI Flash Write operation...
Flash 0-1MB (ME region) is ok.
SPI Flash Write operation successful.
ibexpeak_n6k_nc128_image_checksum...
Verification succeeded...
SPI Chip integrity check successful.
**** ibexpeak_program_bios_command_ex/1017 Trying to Enable Write Protection on the flash ****
00:1f.0:dc 00
***** ibexpeak_program_bios_command_ex/1023 Enabled Write Protection on the flash Successfully!! ****
Linux(debug)#
Linux(debug)#
Linux(debug)# bios_cmd version
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77aa8000; SPIBAR = 0x0x77aa8800
spibar address = 0x77aa8800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
Memory ID: 0x17
Found flash device Micron N25Q064A, 8MB, Minimum sector size 4KB
Table: MFG Id: 0x20; DEV Id: 0x20
Table: MFG Id: 0x20; DEV Id: 0x71
Table: MFG Id: 0x20; DEV Id: 0xba
Platform Type: Norcal-384
ibexpeak_set_bp_bits: setting BP2, BP1, BP0 in the status register to 0x0
magic string in flash = N5K-C5672UP
expected magic string-0 = N5K-C56128P
expected magic string-1 = NPT6001-72
expected magic string-2 = N5K-C5672UP
expected magic string-3 = N5K-C5696Q
expected magic string-4 =
magic string found=1, i=2
BIOS version : v2.1.5(12/03/2015)
Date: 2016-06-23 22:57:51 UTC
Nous rencontrons un léger contre-temps sur le 16a, le sw reporte un probleme sur la version du BIOS en place
[# ] 0% -- FAIL. Return code 0x4071001F (BIOS file size mismatch).
CAUTION: The BIOS/loader/bootrom of above module may be in corrupted state. Please try programming it again and DO NOT reboot without programming it successfully, otherwise you have to manually take out the flash from the card and program it in a BIOS programming station.
Install has failed. Return code 0x40930015 (Pre-upgrade of a module failed).
Please identify the cause of the failure, and try 'install all' again.
Linux(debug)# cd /bootflash/
Linux(debug)# bios_cmd version
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77b77000; SPIBAR = 0x0x77b77800
spibar address = 0x77b77800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
Memory ID: 0x17
Found flash device Micron N25Q064A, 8MB, Minimum sector size 4KB
Table: MFG Id: 0x20; DEV Id: 0x20
Table: MFG Id: 0x20; DEV Id: 0x71
Table: MFG Id: 0x20; DEV Id: 0xba
Platform Type: Norcal-384
ibexpeak_set_bp_bits: setting BP2, BP1, BP0 in the status register to 0x0
magic string in flash = �����������
expected magic string-0 = N5K-C56128P
expected magic string-1 = NPT6001-72
expected magic string-2 = N5K-C5672UP
expected magic string-3 = N5K-C5696Q
expected magic string-4 =
magic string found=0, i=5
BIOS version magic string not found
BIOS version : Error
A ce point, si ca reload ou crash, je pense qu'on brick le switch, on va essayer d'arranger cela..
On wipe le BIOS et on install le nouveau
Linux(debug)# bios_cmd erase
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77bc5000; SPIBAR = 0x0x77bc5800
spibar address = 0x77bc5800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
{ SNIP }
Date: 2016-06-23 22:18:10 UTC
Nous demarrons l'upgrade sur sbg2-16a-n56
Nous upgraderons en ISSU, qui est une maj hitless.
Cependant, l'upgrade charge aussi un nouveau firmware broadcom dans les fex, et il sera necessaire de reloader les fex 2348 ( et uniquement ceux la) afin que la maj soit effective.
La mise a jour débutera vers 22h
Update(s):
Date: 2016-06-24 00:44:36 UTC
all done, tout est okay sur ce couple
Date: 2016-06-24 00:14:41 UTC
le 16b est a jour, nous reloadons les fex 2348
sbg2-16b-n56# sh fex | i 2348
110 fex110 Online N2K-C2348TQ-10GE FOC1912R0GP
112 fex112 Online N2K-C2348TQ-10GE FOC1919R04T
113 fex113 Online N2K-C2348TQ-10GE FOC1930R42T
114 fex114 Online N2K-C2348TQ-10GE FOC1912R0GL
115 fex115 Online N2K-C2348TQ-10GE FOC1930R0BM
116 fex116 Online N2K-C2348TQ-10GE FOC1930R40E
117 fex117 Online N2K-C2348TQ-10GE FOC1930R113
sbg2-16b-n56# reload fex 110
WARNING: This command will reboot FEX 110
Do you want to continue? (y/n) [n] y
sbg2-16b-n56# reload fex 112
WARNING: This command will reboot FEX 112
Do you want to continue? (y/n) [n] y
sbg2-16b-n56# reload fex 113
WARNING: This command will reboot FEX 113
Do you want to continue? (y/n) [n] y
sbg2-16b-n56# reload fex 114
WARNING: This command will reboot FEX 114
Do you want to continue? (y/n) [n] y
sbg2-16b-n56#
sbg2-16b-n56#
sbg2-16b-n56#
Date: 2016-06-24 00:01:45 UTC
sbg2-16a-n56 est a jour, nous passons au 16b
Date: 2016-06-23 23:38:51 UTC
SUCCESS
Module 108: Non-disruptive upgrading.
SUCCESS
Module 109: Non-disruptive upgrading.
SUCCESS
Module 110: Non-disruptive upgrading.
Date: 2016-06-23 23:17:40 UTC
ca passe !
sbg2-16a-n56#
sbg2-16a-n56# sh install all status
There is an on-going installation...
Enter Ctrl-C to go back to the prompt.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Performing supervisor state verification.
SUCCESS
Supervisor non-disruptive upgrade successful.
Pre-loading modules.
le sw va upgrader les 20fexs
Date: 2016-06-23 23:02:49 UTC
a la louche, ca semble mieux apres le reprog
Linux(debug)# bios_cmd program nc72-fsp-v215.bin
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77c14000; SPIBAR = 0x0x77c14800
spibar address = 0x77c14800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
Memory ID: 0x17
Found flash device Micron N25Q064A, 8MB, Minimum sector size 4KB
Table: MFG Id: 0x20; DEV Id: 0x20
Table: MFG Id: 0x20; DEV Id: 0x71
Table: MFG Id: 0x20; DEV Id: 0xba
Platform Type: Norcal-384
ibexpeak_set_bp_bits: setting BP2, BP1, BP0 in the status register to 0x0
filename is nc72-fsp-v215.bin
Executing ibexpeak_bios_flash_program....
ibexpeak_n6k_nc128_bios_checksum...
Source file integrity verified.
SPIBAR base = 0x77414000; SPIBAR = 0x77414800
ibexpeak_program_bios_command_ex/899 Trying to Disabled Write Protection on the flash
00:1f.0:dc 01
{SNIP}
WSector 126 programmed successfully
WSector 127 programmed successfully
Flash programming successfully completed.
Checking SPI Flash Write operation...
Flash 0-1MB (ME region) is ok.
SPI Flash Write operation successful.
ibexpeak_n6k_nc128_image_checksum...
Verification succeeded...
SPI Chip integrity check successful.
**** ibexpeak_program_bios_command_ex/1017 Trying to Enable Write Protection on the flash ****
00:1f.0:dc 00
***** ibexpeak_program_bios_command_ex/1023 Enabled Write Protection on the flash Successfully!! ****
Linux(debug)#
Linux(debug)#
Linux(debug)# bios_cmd version
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77aa8000; SPIBAR = 0x0x77aa8800
spibar address = 0x77aa8800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
Memory ID: 0x17
Found flash device Micron N25Q064A, 8MB, Minimum sector size 4KB
Table: MFG Id: 0x20; DEV Id: 0x20
Table: MFG Id: 0x20; DEV Id: 0x71
Table: MFG Id: 0x20; DEV Id: 0xba
Platform Type: Norcal-384
ibexpeak_set_bp_bits: setting BP2, BP1, BP0 in the status register to 0x0
magic string in flash = N5K-C5672UP
expected magic string-0 = N5K-C56128P
expected magic string-1 = NPT6001-72
expected magic string-2 = N5K-C5672UP
expected magic string-3 = N5K-C5696Q
expected magic string-4 =
magic string found=1, i=2
BIOS version : v2.1.5(12/03/2015)
Date: 2016-06-23 22:57:51 UTC
Nous rencontrons un léger contre-temps sur le 16a, le sw reporte un probleme sur la version du BIOS en place
[# ] 0% -- FAIL. Return code 0x4071001F (BIOS file size mismatch).
CAUTION: The BIOS/loader/bootrom of above module may be in corrupted state. Please try programming it again and DO NOT reboot without programming it successfully, otherwise you have to manually take out the flash from the card and program it in a BIOS programming station.
Install has failed. Return code 0x40930015 (Pre-upgrade of a module failed).
Please identify the cause of the failure, and try 'install all' again.
Linux(debug)# cd /bootflash/
Linux(debug)# bios_cmd version
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77b77000; SPIBAR = 0x0x77b77800
spibar address = 0x77b77800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
Memory ID: 0x17
Found flash device Micron N25Q064A, 8MB, Minimum sector size 4KB
Table: MFG Id: 0x20; DEV Id: 0x20
Table: MFG Id: 0x20; DEV Id: 0x71
Table: MFG Id: 0x20; DEV Id: 0xba
Platform Type: Norcal-384
ibexpeak_set_bp_bits: setting BP2, BP1, BP0 in the status register to 0x0
magic string in flash = �����������
expected magic string-0 = N5K-C56128P
expected magic string-1 = NPT6001-72
expected magic string-2 = N5K-C5672UP
expected magic string-3 = N5K-C5696Q
expected magic string-4 =
magic string found=0, i=5
BIOS version magic string not found
BIOS version : Error
A ce point, si ca reload ou crash, je pense qu'on brick le switch, on va essayer d'arranger cela..
On wipe le BIOS et on install le nouveau
Linux(debug)# bios_cmd erase
card_id = 272
Executing ibexpeak_bios_which_flash....
SPIBAR base = 0x0x77bc5000; SPIBAR = 0x0x77bc5800
spibar address = 0x77bc5800
spi_cmd_32bit = 0xf9000000
spi_cmd = 0x424200; spi_cmd_32bit = 0xf9424200
SPI Flash Identification Rdid Information: 0x17ba20
Manufacturer Identification: 0x20
Device Information
Memory Type: 0xba
{ SNIP }
Date: 2016-06-23 22:18:10 UTC
Nous demarrons l'upgrade sur sbg2-16a-n56
This scheduled maintenance affected: Infrastructure || SBG (SBG1, SBG3, SBG4).